|
|
Item Posts
Sort Order
|
|
|
|
no voltage at coil.
|
bucket22
New User
| Posts: 1
| Joined: 05/07
Posted: 05/06/07
08:03 AM
|
|
i have a chevy 350 using a mallory ultralite dist.. car will not start, no spark,replaced coil, and and module, cap and rotor,still nothing. checked voltage at coil, have less than 1 volt with ign. switch on. can't seem to find where the voltage is supplied from. i would be greatful for any tips.
|
|
|
|
2000jack
New User
| Posts: 1
| Joined: 11/07
Posted: 11/11/07
04:24 AM
|
|
I had almost the same problem, mine was the module. I would suggest a new ballast resistor.
|
|
|
|
jalopy45
User
| Posts: 194
| Joined: 04/07
Posted: 11/12/07
07:28 AM
|
|
You need the balast resistor in there unless you are using the HyFire box, your best bet is to go to www.malloryracing.com and download an installation sheet for your application. I rebuild unilites and the biggest problem people have is not using the ballast resistor and burning out the modules. 
|
|
|
|
|
|
|
|
|